Product-List
Comments
Desulfurization of Iron Ores: Processes and Challenges
The total desulphurisation costs are the combination of the capital costs Iron ore is the raw material for steel production, in addition to iron and slag major component, still contains sulfur
Solid State Desulphurization of Iron Ore and Empirical
scrubbed iron ore was poured into a beaker (reactor). 10ml of 2M of hydrogen peroxide was poured into the beaker containing the iron ore. The mixture was thoroughly mixed to ensure homogeneity. The content was allowed to leach for 20, 40, 60, 80, and 100 minutes at 70ºC. At the end of each
Solid State Desulphurization of Iron Ore and Empirical
the total iron in the ore was dissolved within 120 min. by 12M HCl solution and 8000C using 0.1mm particle size at an optimum stirring speed of 300rpm. Appraisal of results generated from these has been carried using various derived models as analytical tools. A model for the evaluation of the concentrations of dissolved iron
Solid State Desulphurization of Iron Ore and Empirical
3) was mixed with iron ore concentrate and the mixture heated for 600 secs. in a laboratory furnace at within temperature range: 4006000C. -A model was derivedfrom the generated experimental results, validatedand used as a tool for the analysis. The validity of the two-factorial model expressed as; ζ = 0.0969 ln ϑ 0.531 + 0.01ɤ
Desulfurization in roasting iron-ore pellets
Desulfurization of iron-ore pellets was considered in [1‐7]. On the basis of these results and the thermodynamic analysis of possible reactions, the main chemical reactions of sulfur compounds
Desulphurization of Hot Metal IspatGuru
Oct 16, 2013· Desulphurization slag contains about 50 % iron. The loss of heat during the desulphurizing process is an important factor since it reduces the sensible heat of the hot metal sent to the converters. The three primary sources of heat loss are radiation from the surface of the hot metal, addition of cold reagents and introduction of cold injection
DESULPHURIZATION OF STEEL AND PIG IRON
informations on the effectiveness of the pig iron ladle metallurgy desulphurisation.This is realised using soda, calcium carbonate, lime and metallic magnesia. The effect of the pig iron desulphurisation with the mixture of highly sintered lime and metallic magnesia, in proportion 7:3 performed in the ladle is shown in Fig-ure 1.
Sulphur removal in ironmaking and oxygen steelmaking
Different HM desulphurisation processes are used worldwide. With co-injection or the Kanbara reactor, sulphur concen trations below 0.001% are reached. Basic slag helps Iron ore contains typically 0.01% sulphur and is only a minor source of sulphur in the steelmaking process [2,8].
US3284345A Process for desulfurization of crude oil or
US3284345A US378439A US37843964A US3284345A US 3284345 A US3284345 A US 3284345A US 378439 A US378439 A US 378439A US 37843964 A US37843964 A US 37843964A US 3284345 A US3284345 A US 3284345A Authority US United States Prior art keywords crude oil oil desulfurization reduced iron heavy oil Prior art date 1964-06-26 Legal status (The legal status is an assumption and
Desulphurization of pig iron using calcium carbide based
Desulphurization of pig iron using calcium carbide based reagents C. BRODRICK SA Calcium Carbide Use of calcium carbide based reagents is a long established practice for the desulphurization of pig iron/hot metal resulting in the removal of the sulphur from the molten metal as calcium sulphide into the slag floating on the molten metal surface.
Solid State Desulphurization of Iron Ore and Empirical
the total iron in the ore was dissolved within 120 min. by 12M HCl solution and 8000C using 0.1mm particle size at an optimum stirring speed of 300rpm. Appraisal of results generated from these has been carried using various derived models as analytical tools. A model for the evaluation of the concentrations of dissolved iron
Solid State Desulphurization of Iron Ore and Empirical
Agbaja (Nigeria) iron ore was mined and collected from the deposit, beneficiated and the resultant concentrate used for this research work. The iron ore was crushed for the purpose of liberation size. Tyler standard was employed to produce particle size of 250µm . The raw Agbaja iron ore was then sent for chemical analysis using X-ray
Solid State Desulphurization of Iron Ore and Empirical
3) was mixed with iron ore concentrate and the mixture heated for 600 secs. in a laboratory furnace at within temperature range: 4006000C. -A model was derivedfrom the generated experimental results, validatedand used as a tool for the analysis. The validity of the two-factorial model expressed as; ζ = 0.0969 ln ϑ 0.531 + 0.01ɤ
Solid State Desulphurization of Iron Ore and Empirical
concentration of ore slurry wasadjusted to 10% -20% by the aphosphorosis 9K culture and pH of original ore slurry kept at a range of 1.5 to 3.5. The researchwas foundsuitable for direct -extracting and dephosphorizing phosphor-containing iron ore using bacteria, giving a yield of above 80% within 3045
US3284345A Process for desulfurization of crude oil or
US3284345A US378439A US37843964A US3284345A US 3284345 A US3284345 A US 3284345A US 378439 A US378439 A US 378439A US 37843964 A US37843964 A US 37843964A US 3284345 A US3284345 A US 3284345A Authority US United States Prior art keywords crude oil oil desulfurization reduced iron heavy oil Prior art date 1964-06-26 Legal status (The legal status is an assumption and
Flue Gas Desulfurization an overview ScienceDirect Topics
Li, in Iron Ore, 2015. 18.3.2 Mitigation of SO x emissions. SO x removal has been achieved by installing sintering flue gas desulfurization (SFGD) equipment. In addition to the conventional wet-type, dry-type desulfurizing systems, utilizing activated coke adsorption are now used.
iron ore desulfurization plant sbm
sbm hematite iron ore beneficiation plants. iron ore desulfurization plant SBM Iron Ore Desulfurization Plant sbm gold aggregate Mining and Construction Construction is the world's widest range of equipment for rock Check price Desulphurization From Ore Plant In China Crusher Mills Desulphurization From Ore Plant In China flotation desulfurization of iron ore india make iron ore cone .
Industry Sectors Birch Lime Singleton Birch
Desulphurisation of pig iron. Iron ore is not only pure iron oxide, it also contains an assortment of other impurities within the material. These do not necessarily melt at the temperature of the blast furnace, and could eventually clog it up.
Iron & Steel INTERCAL d.o.o.
Lime is used in iron and steel production as a binding, reaction and cleaning agent. Limestone and quicklime are used in ore sintering plants, pig iron desulphurisation, converters, electric furnaces, steel ladles, conditioning stands and ladle furnaces. Lime is used to bind impurities and to remove unwanted substances from the pig iron.
Iron ore Wikipedia
Iron ore is the raw material used to make pig iron, which is one of the main raw materials to make steel—98% of the mined iron ore is used to make steel. In 2011 the Financial Times has speculated that iron ore is "more integral to the global economy than any other commodity, except perhaps oil ".
Steelmaking Wikipedia
Steelmaking is the process of producing steel from iron ore and/or scrap.In steelmaking, impurities such as nitrogen, silicon, phosphorus, sulfur and excess carbon (most important impurity) are removed from the sourced iron, and alloying elements such as manganese, nickel, chromium, carbon and vanadium are added to produce different grades of steel.
Out-of-furnace desulphurization by granulated magnesium
The above technology will enable the use of high sulphur-containing iron ore & coke in the blast furnaces. Since the technology works efficiently at low temperatures, the hot metal from the blast furnace can be tapped at lower temperatures to save on the consumption of coke.
Iron & Steel w&p Kalk GmbH
Lime is used in iron and steel production as a binding, reaction and cleaning agent. Limestone and quicklime are used in ore sintering plants, pig iron desulphurisation, converters, electric furnaces, steel ladles, conditioning stands and ladle furnaces. Lime is used to bind impurities and to remove unwanted substances from the pig iron.
Solid State Desulphurization of Iron Ore and Empirical
The dried scrubbed iron ore was further pulverized and sieved to obtain a particle size of 10µm. Analar grade of acetic acid solutions of different moles of 0.25M, 0.5M, 0.75M, 1.00M and 1.25M were prepared. 50grams of constant particle size of 10µm of scrubbed iron ore was poured into the
Solid State Desulphurization of Iron Ore and Empirical
The dried scrubbed iron ore was further pulverized and sieved to obtain a particle size of 10µm. Analar grade of acetic acid solutions of different moles of 0.25M, 0.5M, 0.75M, 1.00M and 1.25M were prepared. 50grams of constant particle size of 10µm of scrubbed iron ore was poured into the
Solid State Desulphurization of Iron Ore and Empirical
concentration of ore slurry wasadjusted to 10% -20% by the aphosphorosis 9K culture and pH of original ore slurry kept at a range of 1.5 to 3.5. The researchwas foundsuitable for direct -extracting and dephosphorizing phosphor-containing iron ore using bacteria, giving a yield of above 80% within 3045
Solid State Desulphurization of Iron Ore and Empirical
Agbaja (Nigeria) iron ore was mined and collected from the deposit, beneficiated and the resultant concentrate used for this research work. The iron ore was crushed for the purpose of liberation size. Tyler standard was employed to produce particle size of 250µm . The raw Agbaja iron ore was then sent for chemical analysis using X-ray
Desulphurization of cast iron Magnus, Tigerschiold Kjell
This invention relates to the desulphurization of cast or pig iron and has for its object to provide an improved process for this purpose, which shall be more economical and rapid than those previously employed thereby enabling low grade ore having a relatively high sulphur content to be utilised for smelting to produce an iron having the necessary degree of purity in this respect without
Dephosphorization and Desulfurization of Molten Pig Iron
perature of molten iron was in three levels of 1250°, 1350°, 1450°C, and the quantity of Na2C03 added was varied within the range of l0-.40 g/kg-HM. Since the temperature of molten iron fell fairly simul-taneously with the addition of Na2C03, careful con-sideration was given to keeping the temperature of
Department of Civil, Environmental and Natural Resources
desulphurisation to lower sulphur contents, thereby increasing the amount of requested desulphurisation agents and, consequently, increased iron losses to the slag. Iron losses during desulphurisation of hot metal can be in the order of 1.5-3.2% of the total processed hot metal from the blast furnace.6-8, 11-13 Besides the
Iron and Steel Production Eippcb
• sintering and pelletisation of iron ore • the production of molten iron by the blast furnace route, including slag processing • the production and refining of steel using the basic oxygen process, including upstream ladle desulphurisation, downstream ladle metallurgy and slag processing
Iron & Steel INTERCAL d.o.o.
Lime is used in iron and steel production as a binding, reaction and cleaning agent. Limestone and quicklime are used in ore sintering plants, pig iron desulphurisation, converters, electric furnaces, steel ladles, conditioning stands and ladle furnaces. Lime is used to bind impurities and to remove unwanted substances from the pig iron.
The Preparation of Regenerable Sorbents for High
desulphurisation of fuel gases is di scussed. The sorbents investigated are extrudates of ZnO, Indian iron-ore fmes and slimes, ZnO-iron ore fines, ZnO-iron ore slimes, CuO-iron ore slimes, combusted coal ashes (CCA), CuO-CCAs, Zn0-Fe20 3,Cu0-Fe203 and CuO-Fe20 r A1 20 3. These sorbents have been found highly efficient in absorbing sulphurous
Iron ore Wikipedia
Iron ore is the raw material used to make pig iron, which is one of the main raw materials to make steel—98% of the mined iron ore is used to make steel. In 2011 the Financial Times has speculated that iron ore is "more integral to the global economy than any other commodity, except perhaps oil ".
Engineering News Login
Detailed research reports on a diverse range of industry and mining sectors including monthly reports on African, Australasian, Canadian, Coal and Iron-Ore Mining A project-tracking service
Article: Polychlorinated dibenzo- p -dioxins and
Feb 14, 2019· International Journal of Environment and Pollution; 2018 Vol.63 No.4; Title: Polychlorinated dibenzo-p-dioxins and dibenzofurans in off-gas and residue during desulphurisation of iron ore sintering off-gas Authors: Yibo Zhang; Rong Zhu; Jingling Yang; Alfons Buekens; Hui Wang; Yun Wang; Pu Zhang. Addresses: Central Research Institute of Building and Construction, MCC
hot metal desulphurisation process
Hot metal desulphurisation process Flexible. Effective. Economical.3.09 desulphurization iron ore. Hot Metal Desulphurization Danieli Corus.1. Iron & Steel Making Process and Air Pollutants iron ore & coking coal sintering machine coke oven hot stove blast furnace continuous casting converter pre-heating
US Patent for Production of iron Patent (Patent
A process for producing desulphurised iron in a solid form. The process includes (a) direct smelting an iron-containing metalliferous feed material and producing molten iron; (b) desulphurising molten iron produced in the direct smelting (a); and (c) casting desulphurised molten iron from the desulphurisation (b) into a solid form, such as pigs.
A pre-study of Hot Metal Desulphurization
furnace to reduce iron ore and it is one of the major sources of sulfur coming to the hot metal. Other sources of sulfur are the iron ore and the fuels used in different furnaces. (II) Blast Furnace In a blast furnace, the coke reacts directly and indirectly with the iron pellets to produce the metallic iron.
hot metal desulphurisation process
Hot metal desulphurisation process Flexible. Effective. Economical.3.09 desulphurization iron ore. Hot Metal Desulphurization Danieli Corus.1. Iron & Steel Making Process and Air Pollutants iron ore & coking coal sintering machine coke oven hot stove blast furnace continuous casting converter pre-heating
Sulphur removal in ironmaking and oxygen steelmaking
helps desulphurisation in the converter. However, sulphur increase is not uncommon in the converter due to high oxygen activity and sulphur input via scrap and additions. For low sulphur (iron ore, coke and coal)1,4. Sulphur distribution flow To get an overview of
Dephosphorization of Steels IspatGuru
Aug 15, 2016· Iron ore additions can be helpful to maintain ideal FeO content to continue P oxidation in parallel with the decarburization. Kinetics of phosphorus removal. Though P equilibrium has been widely studied, the kinetics of P removal has not been studied to that extent. However, the same principles for other high temperature metallurgical reactions
desulphurization of an iron concentrate
Purpose Tailings generated by sulphide ore processing at Chaabet El Hamra mine Keywords Chaabet El Hamra mine Environmental desulphurization Flotation Mining waste Pyrite 2012 and Genty 2012 tested the scale of iron Fe . Removal of sulfur and phosphorous from iron ore concentrate. Iron ore having high-sulfur content causes problems in the
OA13251A Production of Iron. Google Patents
A process for producing desulphurised iron in a solid form. The process includes (a) direct smelting an iron-containing metalliferous feed material and producing molten iron; (b) desulphurising molten iron produced in the direct smelting (a); and (c) casting desulphurised molten iron from the desulphurisation (b) into a solid form, such as pigs.
Out-of-furnace desulphurization by granulated magnesium
The above technology will enable the use of high sulphur-containing iron ore & coke in the blast furnaces. Since the technology works efficiently at low temperatures, the hot metal from the blast furnace can be tapped at lower temperatures to save on the consumption of coke.
Blast Furnace Charge (Raw Materials for Steel-making
Jan 11, 2013· A blast furnace charge consists of coke, ore or sinter, and limestone. These materials must be in lumps of a certain size (40-60 mm). Larger lumps prolong the process of reduction and fluxing. Smaller lumps block the flue-gas passages and prevent a uniform descent of melting materials in the furnace. 2. IRON ORES: Ore is a metal bearing mineral.
limestone rock or powder desulphurisation
limestone rock or powder desulphurisation. Feed Back scrubbing flue gases with lime stone powder flue gas desulphurisation in sri lanka,Chat Online desulphurization in mineral industry using limestone. 【Live Chat】 RInfra emerges the lowest bidder in NTPC tender.
GoodRich MAGMA Industrial Technologies Limited Russia
GoodRich MAGMA Industrial Technologies Limited is a public limited company based at Bangalore, providing technologies & equipments for industrial projects from
Kwinana Hismelt Plant Iron Smelting YouTube
Oct 17, 2015· -Kwinana Hismelt Plant -Kwinana Plant Progress -Iron Ore Preheater -Steam System -Flue Gas Desulphurisation -Major Operational Lessons Link to the article ht...
Production of iron and steel SlideShare
Apr 27, 2015· 4/27/2015 21 Introduction Production of Iron & Steel Coal Pallets lump ore Fuel oil Ore dust Alloying medium Raw materials Street Habour Rails Coking plant Foreign coke Grading plant Furnace Sintering plant Pig iron desulphurisation Pig Iron Production Engineering Materals II
Production voestalpine Stahl Donawitz GmbH
In nature, iron occurs as ore. In mining, the ore is extracted from the rock and processed. To make iron from the ore, it is reduced and melted in a blast furnace with coke at over 1300°C. The resulting pig iron contains more than 2% carbon and cannot be used for products in this form.
Polychlorinated Dibenzo-p-dioxins and Dibenzofurans
Formation of persistent chlorinated aromatic compounds in simulated and real fly ash from iron ore sintering. Journal of Material Cycles and Waste Management 2017, 19 (4),1437-1445. DOI: 10.1007/s10163-016-0537-5. R. Berenguer, J.M. Sieben, C. Quijada, E. Morallón.